Hello All,
I was wondering if anyone managed to change the LOM from shared to
dedicated using IPMITOOL on a HP system.
I am able to proceed at a Dell system using the raw commands:
To check if the current DRAC is "Shared with failover" or dedicated.
ipmitool raw 0x30 0x25
A result of 00 means shared and 02 means dedicated.
To change to shared:
ipmitool raw 0x30 0x24 0
To change to dedicated:
ipmitool raw 0x30 0x24 2
--
Best regards,
Danny Nieuwenhuis
因模式错误导致管理卡不通的一个实例
|
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 |
[root@localhost ~]# service ipmi start Starting ipmi drivers: [ OK ] [root@localhost ~]# ipmitool lan print Set in Progress : Set Complete Auth Type Support : NONE MD2 MD5 PASSWORD Auth Type Enable : Callback : MD2 MD5 : User : MD2 MD5 : Operator : MD2 MD5 : Admin : MD2 MD5 : OEM : IP Address Source : Static Address IP Address : 10.128.231.166 Subnet Mask : 255.255.255.0 MAC Address : 78:2b:cb:71:d8:e2 SNMP Community String : public IP Header : TTL=0x40 Flags=0x40 Precedence=0x00 TOS=0x10 Default Gateway IP : 10.128.231.1 Default Gateway MAC : 00:00:00:00:00:00 Backup Gateway IP : 0.0.0.0 Backup Gateway MAC : 00:00:00:00:00:00 802.1q VLAN ID : Disabled 802.1q VLAN Priority : 0 RMCP+ Cipher Suites : 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14 Cipher Suite Priv Max : aaaaaaaaaaaaaaa : X=Cipher Suite Unused : c=CALLBACK : u=USER : o=OPERATOR : a=ADMIN : O=OEM [root@localhost ~]# ping 10.128.231.166 PING 10.128.231.166 (10.128.231.166) 56(84) bytes of data. --- 10.128.231.166 ping statistics --- 5 packets transmitted, 0 received, 100% packet loss, time 4009ms [root@localhost ~]# ping 10.128.231.1 PING 10.128.231.1 (10.128.231.1) 56(84) bytes of data. 64 bytes from 10.128.231.1: icmp_seq=1 ttl=255 time=1.57 ms --- 10.128.231.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 1.573/1.573/1.573/0.000 ms [root@localhost ~]# ipmitool raw 0x30 0x25 00 [root@localhost ~]# ipmitool raw 0x30 0x24 2 [root@localhost ~]# ipmitool raw 0x30 0x25 02 [root@localhost ~]# ipmitool lan print Set in Progress : Set Complete Auth Type Support : NONE MD2 MD5 PASSWORD Auth Type Enable : Callback : MD2 MD5 : User : MD2 MD5 : Operator : MD2 MD5 : Admin : MD2 MD5 : OEM : IP Address Source : Static Address IP Address : 10.128.231.166 Subnet Mask : 255.255.255.0 MAC Address : 78:2b:cb:71:d8:e2 SNMP Community String : public IP Header : TTL=0x40 Flags=0x40 Precedence=0x00 TOS=0x10 Default Gateway IP : 10.128.231.1 Default Gateway MAC : 00:00:00:00:00:00 Backup Gateway IP : 0.0.0.0 Backup Gateway MAC : 00:00:00:00:00:00 802.1q VLAN ID : Disabled 802.1q VLAN Priority : 0 RMCP+ Cipher Suites : 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14 Cipher Suite Priv Max : aaaaaaaaaaaaaaa : X=Cipher Suite Unused : c=CALLBACK : u=USER : o=OPERATOR : a=ADMIN : O=OEM [root@localhost ~]# ping 10.128.231.166 PING 10.128.231.166 (10.128.231.166) 56(84) bytes of data. --- 10.128.231.166 ping statistics --- 17 packets transmitted, 0 received, 100% packet loss, time 16000ms [root@localhost ~]# ipmitool bmc reset warm Sent warm reset command to MC [root@localhost ~]# ping 10.128.231.166 PING 10.128.231.166 (10.128.231.166) 56(84) bytes of data. 64 bytes from 10.128.231.166: icmp_seq=2 ttl=63 time=0.548 ms 64 bytes from 10.128.231.166: icmp_seq=3 ttl=63 time=0.496 ms 64 bytes from 10.128.231.166: icmp_seq=4 ttl=63 time=0.451 ms --- 10.128.231.166 ping statistics --- 4 packets transmitted, 3 received, 25% packet loss, time 2999ms rtt min/avg/max/mdev = 0.451/0.498/0.548/0.043 ms [root@localhost ~]# |
我输入之后报错,这条命令如何定义channel,我的channel是1
[root@localhost ~]# ipmitool raw 0x30 0x25
Unable to send RAW command (channel=0x0 netfn=0x30 lun=0x0 cmd=0x25 rsp=0xc1): Invalid command